Hot Sale Modern 5MM Side Office Mobile Pedestal File Cabinet Storage

Description:

Thin edge 5mm Mobile pedestal as our new products, which is widely used in office. As one convinient storage, with mordern appearence and strong construction, which is very popular with young office worker. The standard size is W420*D500*H490MM, other size can be customized based on the office size. For top and front, you could choose wood material as alternative. Delivery time is about 20-30 days for 1x40HQ, MOQ is 200pcs each one. Any color is available. The quality warranty is 5 years.

Specification Sheet:

Products Pictures:

Slide way

Our slides use the high-quality three-section slides of Guangdong Judetai, which can meet European and American standards. The thickness of its three-section slides is 1.2*1.2*1.0, and its material is carbon steel. By testing, it can pull 50,000 times under dynamic load 25kg.

Welding

Projection welding: back top strengthen, back bottom strengthen, door, top, bottom and beam.

CNC welding: point side, support chip. The advantages of the above welding are high efficiency and solder joints evenly.

Spot welding: Short heating time, heat concentration, but the force is unevenly.

Two welding protection: cabinet frame, corner

Laser welding: main welding angles, increased strength, thin edge welding, and top plates and panels for mobile cabinets.

Spraying

The traditional phosphating process, phosphorus content of metal surface is high, heavy metal exceeds the standard, not environmentally friendly.

And we adopt the ceramic process, after the ceramic (degreasing and rust removing ) - washing - passivation (do not in the air to get rusty ) - spraying - curing these steps

The ceramic process is more environmentally friendly and the water treatment costs are lower in the later period (sewage discharge reaches the three-level standard).

Our spraying uses electrostatic spraying. The spraying gun adopts the German Golden Horse/Taiwanese brand. The gun is good, the spraying is uniform, the static electricity is large, and the plastic powder is not easy to fall off.

The powder recycling system adopts a large cyclone recycling system, which has a high recovery rate and can make secondary use of the ground powder. The entire recovery is carried out in a closed environment. The powder will not produce secondary pollution. The recovery system use the negative pressure environment.

The traditional adopt coal furnace heating, we use solidified natural gas heating, there will be no combustion particles attached to the cabinet surface (powder spot ).

Curing temperature: 185 degrees Celsius -190 degrees Celsius

Luoyang Ouzheng Trading Co., Ltd is founded in 2003, which is who-owned subsidiary of Henan Fuyide Industrial Co., Ltd.

At present, the factory covers an area of 50, 000 m³ with more than 300 employees and almost 20 senior engineers.

We have established long-term cooperation with high quality raw material suppliers, has stable high-quality raw materials supply channels, such as cold rolling steel plate and environmental epoxy resin powder to ensure product quality from the source.

Besides, We have the latest automatic NC decoiling line, CNC punching machine,advanced laser cutting equipment, imported Salvagnini P4Xe Automatic panel bender from Italy,automatic welding by robot; laser welding equipment, automatic spray coating lines, automatic packaging equipment and other advanced equipment etc.

We had imported advanced Salvagnini P4Xe Automatic panel bender from Italy. The equipment can improve the accuracy and ensure product consistency with reliable property . A pair of universal bending mold, which can finish most of the bending without being replaced. Besides, it can process the parts of which the length is up to 2500mm,the width is up to 1500mm and the range of the thickness is from 0.5mm to 2.0mm.this machine can process one part within 30 seconds to fulfill the capacity of diversified production.

The factory is specialized in steel filing cabinet, steel locker, cupboard, mobile pedestal, office desk, book shelves, goods rack etc with customers around the world. The products have advantages of strong structure, fashionable appearance, guaranteed quality, which is your best office partner. We've passed ISO9001:2008 international quality management system certification and ISO14001:2004 environment management system certification.

In addition, before the production, QC shall test the toughness, flatness, thickness of steel plates, and ensure plate size error is within the allowable range, surface is smooth and free from concave and burr. Then, workers shall fill in process card then will move to the following procedure of laser cutting .The workers will produce according to the operating instructions and drawings strictly to guarantee the accuracy of side cutting and punching.,which the tolerance is within 0.1mm.

Before packaging, QC will overall check the whole structure, surface and parts.,etc by pre- assembly. At packaging, workers must strictly follow export transportation standard to do package and make sure the quantity of parts are correct and the layout is suitable and firm.

Our products are exported to Europe, America, Australia, Canada, Southeast Asia, Oceania and other countries, the products are subject to a great welcome and praise.

Every year we will participate in various exhibitions both at China and abroad, including guangzhou CIFF Fair in March, Shanghai CIFF Fair in September, and Cologne ORGATEC Exhibition in Germany, which make us make continuous progress and broaden our horizon.

We are experts in office furniture solution.